|
Double
Switch. This element
switches currents on and off, and can change the
current flow from one circuit to another. Place up
to five double switches in the simulation window.
With the Select
tool, you can move and rotate
switches, and wire
them to other objects. You attach wires to the
switch's three
nodes,
which are indicated by the
yellow
rectangles in Figures
1 and 2.
The default position of the
switch is off. You can flip the switch on or
off in either Run
mode or Stop
mode. To flip the switch
in Realistic
View, click on the
metallic handle of the switch and drag it into one
of the start (or stop) positions (displayed in
Figures 1, 2, and 3).
|
Fig.
1
|
Fig.
2
|
Fig.
3
|
|
